NEUTRONICS ULTIMA ID RI-700H PRO HVAC/R REFRIGERANT IDENTIFIER C/W PRINTER Accessories (FOC) For Setting Up 1) 1/4''SAE X 5/16''NPT FEMALE CONNECTOR FOR R134 GAS CYLD R-04X05 = 1PC 2) CULMI RW-341 CONTROL VALVE 1/4'' SAE (M) X 1/4'' SAE (F) (R22/R404A/R407C) = 1PC 3) CULMI RW-341B CONTROL VALVE 5/16'' SAE (M) X 5/16'' SAE (F) (R410A/R32) = 1PC 4) RU-410A ADAPTOR FOR R410A (FEMALE 5/16'' X MALE 1/4'') = 1PC 5) ELECTRICAL ADAPTOR 2-PIN 4-WAY = 1PC The Neutronics Ultima ID Pro™ Refrigerant Analyzer provides a fast, easy and accurate means to determine refrigerant purity in refrigerant storage cylinders or directly in air conditioning systems. The instrument utilizes non-dispersive infrared (NDIR) technology to determine the weight concentrations of multiple refrigerant types. Refrigerant purity is displayed on the LCD Screen and the user must determine acceptable levels of purity based on their recovery or use standards. The instrument is supplied complete with a ¼” Flare Vapor Sampling Hose, a High Pressure Liquid Sample Trap Assembly, a 100-240 VAC power transformer, built in Lithium Iron Phosphate battery, thermal printer, and all required plumbing housed within a rugged, portable, storage case. Testing occurs when sample gas is admitted into the instrument through the supplied sampling hose configurations and presented to the sensing device. The instrument provides the user with direct percent by weight concentrations.   The instrument interfaces with the user via a LCD graphic display, status indicator LED’s, and push button communication switches. Direct percent by weight concentrations of the sampled refrigerant are provided on the display as well as user directions and prompts. An on-board printer is provided to print an on-the-spot analysis report. The Neutronics Ultima ID Pro™ Refrigerant Analyzer provides the refrigerant technician with excellent knowledge of refrigerant type and purity as well as protection against refrigerant contamination and potential flammability. Specifications Weight: Less than 10 lb. Analyzed Refrigerants: R22, R32, R134a, R404A, R407C, R410a, Hydrocarbons (HC) and Air Identified Refrigerants: R12, R1234yf, R408A, R409A, R417A, R421A, R421B, R422A, R422B, R422C, R427A and Hydrocarbons (HC) Accuracy: +/- 2% of indicated gasses or better Power requirements: 12 VDC @ 2A via 110/220 VAC Adapter; Built-in rechargeable Battery pack (internal). Approvals: CE, UL, CUL User interface: Graphic display, soft keys, built in printer Sample gas extraction: Pressure from cylinder or system Temperature range: 50° to 120° F Response time: Less than 3 Minutes Humidity: 0-95% RH non-condensing Test sample size: 5g per test Test pressure: 50 psi – 500 psi Features   Advanced ergonomic design    Rugged rubberized hand grips  Large graphic display with on-screen instructions  Fast test time  Built in printer for instant analysis report  Built in oxygen sensor to detect presence of Air  Vapor or Liquid Sampling ability  Internal, rechargeable Lithium Iron Phosphate battery for cordless operation in any location  Hard shell carry/storage case  USB Port for Remote Software Updates Spare Replacement Parts NEUTRONICS ULTIMA ID RI-700H PRO THERMAL PAPER MASTERCOOL 69HVAC-FILTER FOR 69HVAC   read more

HOSEFLEX 1/4'' RUBBER TWIN HOSE W/P : 20BAR (290PSI) (MADE IN MALAYSIA) Type HOSEFLEX 1/4'' RUBBER TWIN HOSE X 10M / ROLL W/P : 20BAR (290PSI) (MADE IN MALAYSIA) HOSEFLEX 1/4'' RUBBER TWIN HOSE X 100M / ROLL W/P : 20BAR (290PSI) (MADE IN MALAYSIA)     read more

MUREX L/W WELDING TORCH COMPLETE WITH CHECK VALVE & 3 PCS TIP (NO. 1, 2 & 3)   read more

GENTEC 591 SERIES HIGH PRESSURE PISTON REGULATORS Model 591 Series High Pressure Piston Regulators feature a reliable piston design for precise gas control at high inlet and delivery pressures rating up to 4500 PSIG. Like all GENTEC® quality products, the 591 Series provides superior performance and safety features. Features   • Piston-type construction • Body and housing cap are machined from class ''A'' brass • Delrin-cap bushing for smooth adjustments • Sintered bronze inlet filter • 1/4'' Stainless steel Compression-Tube Fitting (GENLOK™ ) Outlet • 2-1/2'' gauges • Weight: 4 lbs • Conforms to CGA E-4 standard for • gas pressure regulators Model GENTEC 591IN-4500 HIGH PRESSURE PISTON REGULATOR (SINGLE STAGE) (P/N:110246326) GENTEC 591IN-3000 HIGH PRESSURE PISTON REGULATOR (SINGLE STAGE) (P/N:110246325) Inlet Connection change to bs04 for H2 application   GENTEC 591IN-3000 INERT GAS (Ar, He, N2) HIGH PRESSURE PISTON REGULATOR (SINGLE STAGE) (P/N:110246325)   Gas Service - INERT GAS (Ar, He, N2) Maximum Inlet Pressure (PSI) - 5500  Maximum Delivery Pressure (PSI) - 300 - 4500 Product Link: https://www.genstartech.com/high-pressure-piston-regulators   read more

DANFOSS ELIMINATOR FILTER DRIER SHELL (W/O FILTER CORE) Model DANFOSS ELIMINATOR 5/8'' (ODF) DCR-0485S (023U7250) FILTER DRIER SHELL (W/O FILTER CORE) (COVER TYPE:PLUG) DANFOSS ELIMINATOR 7/8'' (ODF) DCR-0487S (023U7251) FILTER DRIER SHELL (W/O FILTER CORE) (COVER TYPE:PLUG) DANFOSS ELIMINATOR 7/8'' (ODF) DCR-0967S (023U7258) FILTER DRIER SHELL (W/O FILTER CORE) (COVER TYPE:PLUG) DANFOSS ELIMINATOR 1-1/8'' (ODF) DCR-0489S (023U7253) FILTER DRIER SHELL (W/O FILTER CORE)(COVER TYPE:PLUG) DANFOSS ELIMINATOR 1-1/8'' (ODF) DCR-0969S (023U7260) FILTER DRIER SHELL (W/O FILTER CORE)(COVER TYPE:PLUG) DANFOSS ELIMINATOR 1-3/8'' (ODF) DCR-04811S (023U7254) FILTER DRIER SHELL (W/O FILTER CORE)(COVER TYPE:PLUG) DANFOSS ELIMINATOR 1-3/8'' (ODF) DCR-09611S (023U7261) FILTER DRIER SHELL (W/O FILTER CORE)(COVER TYPE:PLUG) DANFOSS ELIMINATOR 1-3/8'' (ODF) DCR-14411S (023U7267) FILTER DRIER SHELL (W/O FILTER CORE)(COVER TYPE:PLUG)   read more

JINTIAN CHINA COPPER TUBE COIL ASTM B280 Size 3/8'' X 0.61MM (SWG 23) X 15M JINTIAN CHINA COPPER TUBE COIL ASTM B280 (9 COILS/BOX) = RM PER ROLL (8-12-2021-10) 5/8'' X 0.71MM (SWG 22) X 15M JINTIAN CHINA COPPER TUBE COIL ASTM B280 (5 COILS/BOX) = RM PER ROLL 1/2'' X 1.22MM (SWG 18) X 15M JINTIAN CHINA COPPER TUBE COIL ASTM B280     read more

BELIMO LR230A OPEN-CLOSE NON-RETURN ROTARY ACTUATOR FOR BALL VALVE 5NM, 230VAC, 50/60HZ (REPLACED:LRU230) Replacement For TRANE:TLRU230   Rotary actuator for ball valves   • Torque motor 5 Nm • Nominal voltage AC 230 V • Control Open/close, 3-point   Electrical data Nominal voltage AC 230 V Nominal voltage frequency 50/60 Hz Nominal voltage range AC 85...265 V Power consumption in operation 2 W Power consumption in rest position 0.5 W Power consumption for wire sizing 4 VA Connection supply / control Cable 1 m, 3 x 0.75 mm² Parallel operation Yes (note the performance data) read more

JB PLATINUM SPARK-PROOF VACUUM PUMP WITH A2L GASES (R32/R1234YF) (230V/50HZ) Note Only JB DV-200N-250UKSP 7 CFM (1/2HP) Model JB DV-200N-250UKSP 7 CFM (1/2HP) PLATINUM SPARK-PROOF VACUUM PUMP (R32/R1234YF) (230V/50HZ) JB DV-285N-250UK 10 CFM (1/2HP) PLATINUM VACUUM PUMP (230V/50HZ) = STOPPED SELLING! DV-200N FEATURES   Platinum 7 CFM (200 l/m) vacuum pump ·         1/2 HP, 1725/1425 RPM capacitor start motor with thermal overload protection   ·         1/2” x 1/4'' x 3/8” intake port   ·         Voltage 115 & 230v Hertz 50/60 (On Selection)   ·         Standard English Power Plug   ·         21 ounce (680 cc) oil capacity   ·         Gas ballast increases and keeps oil cleaner   ·         2 stage direct drive to achieve deep 15 micron vacuum   ·         Check valve prevents oil back flow during power failure   ·         Low profile rocker switch   ·         Lift ring to hoist   ·         Tethered safety cap prevents oil spills during transport   ·         1/2'' NPT break resistant handle encompasses exhaust   ·         Lighter weight finned aluminum housing reduces heat during operation   ·         Well-protected drain valve sealed with O-ring to prevent leaks   ·         All metal construction including all brass fittings   ·         Completely field repairable   ·         UL Recognized   ·         Made in the USA DV-285N Features:   ·         Platinum 10 CFM (285 l/m) vacuum pump   ·         1/2 HP, 1725 RPM capacitor start motor with thermal overload protection   ·         1/2” x 1/4'' x 3/8” intake port   ·         Voltage 115 & 230v Hertz 50/60 (On Selection)   ·         Standard English Power Plug   ·         26 ounce (709 cc) oil capacity   ·         Gas ballast increases and keeps oil cleaner   ·         2 stage direct drive to achieve deep 15 micron vacuum   ·         Check valve prevents oil back flow during power failure   ·         Low profile rocker switch   ·         Lift ring to hoist   ·         Tethered safety cap prevents oil spills during transport   ·         1/2'' NPT break resistant handle encompasses exhaust   ·         Lighter weight finned aluminum housing reduces heat during operation   ·         Well-protected drain valve sealed with O-ring to prevent leaks   ·         All metal construction including all brass fittings   ·         Completely field repairable   ·         UL Recognized   ·         Made in the USA JB Industries PLATINUM® series vacuum pump is the best pump in the industry. Designed for the serious air conditioning and refrigeration technician, the PLATINUM® vacuum pump features a gas ballast and blank off valve. American made and subjected to JB's rigorous performance standards, the PLATINUM® series is the top of the line for both quality and durability. Backed by an unprecedented 2 year over-the-counter warranty, there is no better pump on the market. Because each PLATINUM® pump is made at our facility in Aurora, Illinois, quality and dependability are woven in with hard working American pride. Completely field repairable, our PLATINUM® series is designed to last. Each PLATINUM vacuum pump has the following features: Gas ballast increases and keeps oil cleaner 2 stage direct drive to achieve deep 15 micron vacuum Check valve prevents oil back flow during power failure Low profile rocker switch Tethered safety cap prevents oil spills during transport Lighter weight finned aluminum housing reduces heat during operation Well-protected drain valve sealed with O-ring to prevent leaks 1/2 horsepower capacitor start motor with thermal overload protection All metal construction, including all brass fittings 100% field repairable Made in the USA   read more

KULTHORN (SECOP) COMPRESSOR NL8.4MF 105G WITH SERVICE KIT (R134A) - 220-240V/50HZ   read more