HONEYWELL NON-SPRING RETURN DAMPER ACTUATOR 20/34 Nm (177/300 lb-in) FOR MODULATING CONTROL Model   CN7220A2007 20Nm,24Vac/Vdc, Modulating control, Non-Spring return, Voltage Feedback Signal and without aux. Switch CN7234A2008 34Nm,24Vac/Vdc, Modulating control, Non-Spring return, Voltage Feedback Signal and without aux. Switch GENERAL   These direct-coupled damper actuators provide modulating control for: • Air dampers • VAV units • Air handlers • Ventilation flaps • Louvers, and • Reliable control for air damper applications with up to 4.6m2  / 50 sq.ft. (20 Nm / 177 lb-in) or 7.8m2  / 85 sq.ft. (34 Nm / 300 lb-in)(seal- less damper blades; air friction-dependent)  FEATURES   • New self-centering shaft adapter • Access cover to facilitate connectivity • Declutch for manual adjustment • Mechanical end limits (CN7220 only) • Field-installable auxiliary switches • Rotation direction selectable by switch • Mountable in any orientation (no IP54 if upside down) • Mechanical position indicator SPECIFICATIONS   Supply voltage 24 Vac ±20%, 50/60 Hz;  24 Vdc -10...+20% Nominal voltage 24 Vac, 50/60 Hz; 24 Vdc All values stated hereinafter apply to operation under nominal voltage conditions. Power consumption CN7220 6 VA / 6 W CN7234 8 VA / 6 W Ambient limits Ambient operating limits -20...+60 ℃ (-5...+140 °F) Ambient storage limits -40...+80 ℃ (-40...+175 °F) Relative humidity 5...95%, non-condensing Safety Protection standard IP54 as per EN 60529 Protection class II as per EN 60730-1 Overvoltage category II Lifetime Full strokes 60000 Repositions 1.5 million Mounting Round damper shaft 10…27 mm (3/8...1-1/16”) Square damper shaft 10...18 mm (3/8...11/16”)  45° steps Shaft length min. 22 mm (7/8”) Control signal 0(2)...10 Vdc  0(4)...20 mA Input impedance 100 kΩ [0...10 V]  500 Ωm [0...20 mA] Feedback signal Limits ± 1 mA at 0...10 V Torque rating CN7220 20 Nm (177 lb-in) CN7234 34 Nm (300 lb-in) Runtime 95 sec (60 Hz) / 110 sec (50 Hz) Rotation stroke 95°± 3° Dimensions see “Dimensions” on page 6 Weight 1.35 kg (3 lbs.) Noise rating 40 dB(A) max. at 1 m read more

INABA DENKO INSULATED COPPER TUBE / PIPE Sizes PC2320U-JE/UV (COPPER O.D X 0.61 [T])) ¼” X 3/8” X 20M + (INSULATION [T]) 8MM X 8 MM  PC2420U-JE/UV (COPPER O.D X 0.61 [T])) ¼” X 1/2” X 20M + (INSULATION [T]) 8MM X 10 MM  PC2520U-JE/UV (COPPER O.D X 0.61 & 0.81 [T])) ¼” X 5/8” X 20M + (INSULATION [T]) 8MM X 10 MM  PC2320-JE (COPPER O.D X 0.8 [T])) ¼” X 3/8” X 20M + (INSULATION [T]) 8MM X 8 MM  PC2420-JE (COPPER O.D X 0.8 [T])) ¼” X 1/2” X 20M + (INSULATION [T]) 8MM X 10 MM  PC2520-JE (COPPER O.D X 0.8 & 1.0 [T])) ¼” X 5/8” X 20M + (INSULATION [T]) 8MM X 10 MM  PC3520-JE (COPPER O.D X 0.8 & 1.0 [T])) 3/8” X 5/8” X 20M + (INSULATION [T]) 8MM X 10 MM  read more

2.0 LITRE PLASTIC SPRAYER Packing 15-pc/box read more

CARRIER HC67HY536FC25 FAN MOTOR C/W CAPACITOR (2.0UF) -(42ZM006H70125)   read more

Danfoss Lube Oil Protection Control Product Origin Made By Code   66 (Holland)  91 (India) Model DANFOSS MP54-060B016866/060B016891 OIL PRESSURE CONTROL 90 SECONDS (DIFF 0.65 BAR) DANFOSS MP54-060B016866 OIL PRESSURE CONTROL 90 SECONDS (DIFF 0.65 BAR) DANFOSS MP55-060B017066 OIL PRESSURE CONTROL 45 SECONDS (DIFF 0.30 TO 4.5 BAR) DANFOSS MP55-060B017191/060B017166 OIL PRESSURE CONTROL 60 SECONDS (DIFF 0.30 TO 4.5 BAR) DANFOSS MP55-060B017266 OIL PRESSURE CONTROL 90 SECONDS (DIFF 0.30 TO 4.5 BAR)   read more

Tool Bag (Cloth Type) Type BH/PRO/GRIP 22'' CANVAS (CLOTH) TOOL BAG     read more

R507 X 22LBS (10KGS) HFC FORANE 507 REFRIGERANT GAS An azeotropic blend of R-125 and R-143a intended for low and medium temperature refrigeration systems. Similar to R-404A in operation, most new equipment has been rated to use either blend. There will be slightly higher pressures and capacity with R-507 compared to R-404A. R-507 requires polyolester (POE) lubricant, which is usually charged into new equipment. If retrofitting existing equipment, the original oil must be replaced with POE. read more

P&M 560G (R22/134A/404A - C/W 60" R/Y/B HOSES) MANIFOLD SET   read more

Honeywell T6360B1028 Room Thermostat The T6360 is a mains voltage Room Thermostat designed to give automatic temperature control of domestic wet central heating systems. It can be used to directly switch a circulating pump or boiler, or to operate spring return and motor open/motor close zone valves.   The T6360 can switch electrical heating loads up to 10A. The T6360 thermostat can also be used for cooling applications.   Features Dual diaphragm temperature sensing element Suitable for surface or switch box mounting Heat anticipator for close temperature control 10 to 30C setpoint range Change-over contact switching (cooling loads) Double insulated   Options Temperature setback model Tamper resistant model Model with indicator lamp Setting dial marked 1 to 5 High current rated model Range stops read more

Flare Elbow (Brass) Size 1/4" FLARE ELBOW 3/8" FLARE ELBOW 1/2" FLARE ELBOW 5/8" FLARE ELBOW 3/4" FLARE ELBOW   read more