Honeywell ML6425, ML7425 Spring Return Electric Linear Valve Actuators

Honeywell ML6425, ML7425 Spring Return Electric Linear Valve Actuators

HONEYWELL ML7425A8018-E 24V 50/60HZ DIRECT COUPLED ELECTRIC VALVE ACTUATOR

HONEYWELL ML7425A8018-E 24V 50/60HZ DIRECT COUPLED ELECTRIC VALVE ACTUATOR

HONEYWELL ML7425A8018-E 24V 50/60HZ DIRECT COUPLED ELECTRIC VALVE ACTUATOR

HONEYWELL ML7425A8018-E 24V 50/60HZ DIRECT COUPLED ELECTRIC VALVE ACTUATOR

HONEYWELL ML7425A8018-E 24V 50/60HZ DIRECT COUPLED ELECTRIC VALVE ACTUATOR

HONEYWELL ML7425A8018-E 24V 50/60HZ DIRECT COUPLED ELECTRIC VALVE ACTUATOR

HONEYWELL ML7425A8018-E 24V 50/60HZ DIRECT COUPLED ELECTRIC VALVE ACTUATOR

Honeywell ML7425A8018

Download Files

Honeywell_ML6425,_ML7425_Spring_Return_63-2516.pdf (848.15 KB)

• HONEYWELL

Honeywell ML6425, ML7425 Spring Return Electric Linear Valve Actuators

Model

HONEYWELL ML7425A8018-E 24V 50/60HZ DIRECT COUPLED ELECTRIC VALVE ACTUATOR 

Note
Replaced ML7425A6016  model
Replaced ML7425A3013 model

FEATURES
 

ML6425 and ML7425
 

• Accurate valve positioning.

• Quick and easy installation.

• No separate linkage required.

• On power failure:

ML6425A and ML7425A drive valve stem down.

ML6425B and ML7425B draw valve stem up.

• Conduit connector is standard.

• No adjustments required.

• True spring return on power failure.

• Low power consumption.

• High close-off ratings.

• Force-limiting end switches.

• Direct/reverse action.

• Synchronous motor.

• Corrosion resistant design.

• Maintenance free.
 

ML7425
 

• Position Feedback signal.

• Fail-safe position selection for control signal loss.

APPLICATION
 

The ML6425 Spring Return Electric Linear Valve Actuators

are floating control actuators used with controllers that provide

a switched or floating single-pole double-throw (spdt) output.

These actuators operate standard Honeywell valves in

heating, ventilating, and air conditioning (HVAC) applications.

The ML7425 Spring Return Electric Linear Valve Actuators

are modulating control actuators used with controllers that

provide an analog output of 0 to 10 Vdc or 2 to 10 Vdc. These

actuators operate standard Honeywell valves in heating,

ventilating, and air conditioning (HVAC) applications. An

internal selector can be used to reverse the direction of action.